Telephone +44(0)1782 536615 or Fax +44(0)1782 533415 or e-mail; info@pugmills.com
Telephone +44(0)1782 536615 or Fax +44(0)1782 533415 or e-mail; info@pugmills.com
The G122 jigger and jolley machine wae specifically designed to be completely adaptable so that it can be used for educational and rehabilitation purposes . The G122 was designed from the G120E but adapted to allow for the operater to be seated , in a wheel chair or in the standing position . The G122 is fully adjustable in height to acommadate the various operating postions by means of a crank handle at the back of the machine and is also fitted with gas assisted struts to assist adjustment . The G122 is fully mobile and will fit through a standard door way , it has been fitted with screw down feet to raise the castor wheels off the ground and also to level the machine . The construction is of a very sturdy steel fabricated design , the slash tray is fitted with a fold down front to allow acsess to the plaster mould if the operater is in the seated position . The G122 is powered by a vary quiet and powerful motor and gear box which has variable speed control from 0—400 rpm , the operaters control box is adjustable for position and all the switch gear has been designed to be operated in the standing or seated position and the switch gear is all to a IP 55 standard making it extremely safe .
Technical specification
Dimensions— 720 mm long x 820 mm wide x Variable height
Weight—Approximatley 140 Kilos
Thread size on main shaft—1” BSW
Drive—1 HP with variable speed control
The G81 glaze dipping tub is for the professional studio and small industrial producer , this machine speeds up the process of glaze dipping and will keep the glaze in suspension and also filter out any foreign bodies that have entered the glaze through the dipping process. The glaze is circulated from the main tank via a air operated versamatic polypropylene pump through a vibrating sieve and then back into the main tank .
Technical Specification
Working height— 965 mm
Capacity nominal- 40-45 gallons (180-205 litres)
Sieve mesh- To customers requirements
Sieve dia- 10” (254 mm)
Pump— 1/2” versamatic p/prop
Dimensions— 1676 mm high x 920 mm wide x 920 mm deep
Weight approximately 50 Kilos